AZBox Premium HD+ User Manual High Definition Digital Satellite Receiver. Route power supply cords so that they are not likely to be walked on.

Registered: Posts: 225 Posted Hello everyone I was wondering if anyone here knows what the problems were with the AZBox power supplies that was causing them to burn out. I have rebuilt my Pansat9200HD power supply and was hoping I might be able to to the same with the AZBox Premium HD + external. With a little help knowing what to look for and change out I,m sure I could make them work again. I already have replacements that Rick sent out to me as soon as I let him know, but would like to rebuild these if I can to have them as backup. Once again I would like to thank Rick for the great service he has provided me.

Iggy57 __________________ AZB0X Premium HD+, Pansat 9200HD with DVB-S2, SonicView 8000HD,10 foot C/ku-Band Mesh Dish One 20' Bell dish subbed, and a large stack of paper weights in the closet. Registered: Posts: 225 Posted I have not had a chance to use this info, but thought I would pass it on for others to use. I am going to be ordering up the parts and see if I can get this done on 2 of the bad supplies I have. I will let others know how I make out once I get a chance to test.

I would love to hear any feed back from others if they have found this doc already and have tried the repair. Iggy57 Attached Files (322.37 KB, 189 views) __________________ AZB0X Premium HD+, Pansat 9200HD with DVB-S2, SonicView 8000HD,10 foot C/ku-Band Mesh Dish One 20' Bell dish subbed, and a large stack of paper weights in the closet. Originally Posted by iggy57 I have not had a chance to use this info, but thought I would pass it on for others to use. I am going to be ordering up the parts and see if I can get this done on 2 of the bad supplies I have. I will let others know how I make out once I get a chance to test. I would love to hear any feed back from others if they have found this doc already and have tried the repair.

Iggy57 Well I replaced the two parts listed in the PDF today. Fortigate Vm License Crack on this page. Ordered them from Newark.

As soon as I plugged the power supply in after replacing them Poof it blew out the fuse. I will attempt to do the other power supply I have later this weekend.What a challenge getting that heat sink on and off!!! Iggy57 __________________ AZB0X Premium HD+, Pansat 9200HD with DVB-S2, SonicView 8000HD,10 foot C/ku-Band Mesh Dish One 20' Bell dish subbed, and a large stack of paper weights in the closet. Originally Posted by iggy57 I have not had a chance to use this info, but thought I would pass it on for others to use. I am going to be ordering up the parts and see if I can get this done on 2 of the bad supplies I have.

I will let others know how I make out once I get a chance to test. I would love to hear any feed back from others if they have found this doc already and have tried the repair.

Iggy57 Well I replaced the two parts listed in the PDF today. Ordered them from Newark. As soon as I plugged the power supply in after replacing them Poof it blew out the fuse. I will attempt to do the other power supply I have later this weekend.What a challenge getting that heat sink on and off!!!

Iggy57 The rectifier bridge output is polarity sensitive. Be sure the plus and minus pins are in the correct position, the replacement could differ from the original. Could be an regulator output problem as well. __________________ The Big Dish since 1984! WineGard CK1088 10ft; Corotor II; Norsat 8515/4206a; Venture 24'; DSR920; AzBox Elite 0.9.5020; LinkBox 8000 HD Local; QS1080IR V3.16. Originally Posted by iggy57 I have not had a chance to use this info, but thought I would pass it on for others to use. I am going to be ordering up the parts and see if I can get this done on 2 of the bad supplies I have.

I will let others know how I make out once I get a chance to test. I would love to hear any feed back from others if they have found this doc already and have tried the repair. Iggy57 Well I replaced the two parts listed in the PDF today. Ordered them from Newark. As soon as I plugged the power supply in after replacing them Poof it blew out the fuse. I will attempt to do the other power supply I have later this weekend.What a challenge getting that heat sink on and off!!!

Iggy57 The rectifier bridge output is polarity sensitive. Be sure the plus and minus pins are in the correct position, the replacement could differ from the original. Could be an regulator output problem as well. Good advice BillinIndy The new rectifier bridge pins were different, however I noticed that before installing and made sure to have the plus and minus pins in the correct positions. Thanks for the feed back and advice. Hope to have better luck with the other one.